TheTechIdea OilGas - User guide Developer guide →

Validation messages

The software checks data before drawing it. Errors mean a result cannot be trusted (for example a casing larger than its hole); warnings point at likely data problems (a survey dogleg above your threshold, a top picked twice); info messages are notes (an estimated value). Thresholds come from your environment.

Code prefix Area
WV Document, survey and depth reference
WL Logs and log tracks
WS Schematic
WB Well barriers and leak paths
WA Annuli and MAASP

CV - Configuration verification (wellbore-config verify)

CodeSeverityMessage (… = filled in)
CV001Errorleak-path network '…': … refers to unknown cavity '…'
leak-path network '…': link … has unknown envelope '…'
CV002Errorleak-path network '…': based on unknown network '…'
leak-path selection '…' chooses unknown network '…'
CV003Errorinvalid well identifier pattern: …
CV004Infoabandonment rule set '…' has no value for …
CV005Warningmodel catalog: … '…' is defined … times (the first is used)
CV006Warningsymbol role '…': component type '…' is not in the model catalog
CV101Errorbased on unknown template '…'
CV102Errorbinding '…' uses unknown symbol role '…'
CV103Errorbinding '…': kind must be string or equipment, not '…'
binding '…': pick must be first, deepest or deepestBottom, not '…'
CV104Errorrequires unknown binding '…'
CV105Errorunknown envelope '…'
unknown plug envelope '…'
CV106Error…: element type is not in the model catalog
CV107Error…: target '…' is not a binding
CV108Error… …: …
… when: …
CV109Error…: unknown target kind '…'
CV110Warningsymbol role '…': symbol '…' is not in the symbol catalog

WV - Document, survey and depth reference

CodeSeverityMessage (… = filled in)
WV001ErrorDepth axis bottom (…) must be greater than top (…).
WV002ErrorAxis is … but the document has no survey (depths cannot be converted).
WV003WarningThe view has no tracks.
WV004ErrorDuplicate track id '…'.
WV005WarningTrack '…' is of type '…', whose family is not loaded (kept, not drawn).
WV006ErrorTrack '…' has a non-positive width ratio.
WV007InfoNo depth track: depth labels will not be shown.
WV008InfoTop '…' at … is outside the depth axis.
WV009ErrorTrack '…' validation failed: …
WV010ErrorSurvey MD must increase: station … (…) after ….
WV011ErrorSurvey station at …: inclination … outside 0-180.
WV012WarningSurvey station at …: azimuth … outside 0-360.
WV013WarningDogleg severity … deg/… at … … exceeds … (survey or well path check).
WV020ErrorInterval '…' has bottom <= top.
WV021WarningInterval '…': unknown lithology '…'.
WV022WarningIntervals '…' and '…' overlap.
WV030WarningTrajectory track '…' has no survey to show.
WV040Warning…: referenced schematic track '…' is not in the view.
WV041Warning…: the view has no schematic track to read.
WV050WarningTop '…' is picked at … different depths.
WV051WarningContact '…' has unknown type '…'.
WV052Error… (…) is below … (…): gas must sit above oil, oil above water.
WV060WarningWells use different coordinate systems (
WV061InfoNo coordinate system for …; others use ….
WV062InfoNo magnetic reference for the survey (no field in the header and no well location): position uncertainty uses the simple model.
WV063InfoMagnetic field computed for an assumed date: ….
WV064WarningSurvey tool '…' (from md …) is not one of the environment's tool models - … is used instead.

WI - Well identifiers (national formats)

CodeSeverityMessage (… = filled in)
WI001Warningwell '…': identifier … matches none of the expected formats:
WI002Errorwell identifier format '…': invalid pattern (…)

WL - Logs and log tracks

CodeSeverityMessage (… = filled in)
WL001Error… scale minimum equals maximum (…).
WL002Error… log scale needs positive limits (min …, max …).
WL003Warning… has no samples.
WL004Info… samples are not in depth order (sorted automatically for drawing).
WL005Warning… has … duplicate depth(s).
WL006Warning… contains … null value(s) (… / NaN) — they should be removed on import.
WL007Info… data (…-…) lies outside the depth axis.
WL008Info… has … data gap(s) larger than …x the sample step.
WL009Warning…: …% of values are outside the scale …-… (rescale or enable a backup scale).
WL010Warninglithology intervals overlap at ….
WL011Error… fills between curves but companion '…' is not in this track.
WL012Warning… uses cutoff shading without a cutoff value (FillReference).
WL013Warning… fill style '…' is not in the lithology library (default fill used).
lithology '…' is not in the lithology library.
WL020Error…: flag interval at … has bottom <= top.
WL021Warning…: flag intervals overlap at ….
WL022Info…: code(s) … have no style and are not drawn.
WL030Warning…: fewer than two valid tests — no gradients.
WL031Warning…: … gradient fit RMS residual … exceeds … (mixed fluids or bad tests?).
WL032Info…: … gradient from only … tests.
WL033Info…: test at … is outside the depth axis.
WL040Error…: zero or negative values on a log scale cannot be plotted.
WL041Warning…: …% of points are outside the scale (not drawn).
WL042Info…: scale …-… matches none of the curves in this track (points are not directly comparable).
WL050Error…: dip … at … outside 0-90°.
WL051Warning…: azimuth … at … outside 0-360°.
WL052Info…: no dips.
WL060Info…: no waveforms.
WL061Error…: … depths for … traces.
WL062Error…: traces have different sample counts.
WL063Error…: time step must be positive.
WL070Warning…: sample …-… totals …% (expected ~100%).
WL071Warning…: unknown lithology '…' at ….
WL072Warning…: cuttings samples overlap at ….
WL073Error…: cuttings sample at … has bottom <= top.
WL080Error…: image rows have different azimuth sample counts.
…: … depths for … rows.
WL081Error…: image depths must increase.
WL082Warning…: sinusoid picks need the borehole diameter.
WL083Info…: no image data.

WS - Schematic

CodeSeverityMessage (… = filled in)
WS001ErrorDepth axis bottom must be greater than top.
WS002ErrorDuplicate id '…'.
WS010ErrorString '…' uses unknown symbol '…'.
WS011ErrorString '…' uses equipment symbol '…'.
WS012ErrorString '…' has bottom <= top.
WS013WarningCement interval of '…' is outside the string or empty.
WS014WarningString '…' extends beyond the depth axis.
WS020WarningFormation '…' uses unknown lithology '…'.
WS021WarningFormation '…' has bottom <= top.
WS030ErrorEquipment '…' uses unknown symbol '…'.
WS031ErrorEquipment '…' uses string asset '…'.
WS032WarningEquipment '…' is outside the depth axis.
WS033Info'…' is not a surface symbol but is placed in the surface stack.
WS034ErrorEquipment '…' breaks unknown string '…'.
WS035ErrorEquipment '…' sections unknown string '…'.
WS040WarningNo host string (slot r=…) at … for '…' (…).
No string to section (slot …) at … for '…' (…).
WS041Info'…' and '…' overlap on the same string at this scale (…, …).
WS050ErrorString '…': hole …in is not larger than its OD …in.
WS051InfoString '…' has no hole size (estimated for drawing).
WS060Warning…: no survey — the well path cannot be drawn.
WS061Warning…: no schematic track to draw along the path.
WS070ErrorSymbol id '…' is used … times.
WS071ErrorSymbol '…' has unknown kind '…' (expected …).
WS072WarningSymbol '…' uses layer '…', which is not in the layer order.
WS073ErrorSymbol '…' has no drawing primitives.
WS074ErrorSymbol '…': body …-… must lie inside its viewBox (0-…).
WS075WarningSymbol '…' has no name.
WS080InfoString '…': outside diameter … in is not a standard … size of … (nearest … in).
String '…' outside diameter … in is not a standard … size of … (nearest … in).
WS081InfoString '…': grade '…' is not in the tubular catalogue (…).
String '…' grade '…' is not in the tubular catalogue (…).
WS082InfoString '…': connection '…' is not in the tubular catalogue (…).
String '…' connection '…' is not in the tubular catalogue (…).

WB - Well barriers and leak paths

CodeSeverityMessage (… = filled in)
WB001WarningNo … well barrier defined (two independent barriers expected).
WB002WarningCommon WBE in primary and secondary barriers: …. Risk assessment and risk-reducing measures required.
WB003Error… has FAILED — … barrier not intact.
WB004Warning… is impaired.
WB005Info… has no verification date.
WB006Error… does not reference a component or string.
… references unknown item '…'.
WB007Warning…: casing / cement WBEs should be labelled with size and depth.
WB008Error… needs a depth interval.
WB020Warning…: no barrier data to analyse.
WB021Error…: weakest leak path has … barrier(s), … required (…).
WB022Warning…: link '…' references unknown barrier element '…'.
WB023Warning…: the weakest leak path counts unverified elements.
WB030WarningAnnotation '…' refers to a track that is no longer in the view.
WB031InfoAnnotation '…' at … lies outside the depth axis.

WE - Equipment attributes

CodeSeverityMessage (… = filled in)
WE001Warning…: … is required.
WE002Error…: … '…' is not a number.
…: … '…' is not a date (yyyy-MM-dd).
…: … '…' is not a value with a unit.
WE003Warning…: … is in '…', which cannot be converted to ….
WE004Warning…: … …… is outside … to ….
WE005Warning…: … '…' is not one of: ….

WA - Annuli and MAASP

CodeSeverityMessage (… = filled in)
WA001ErrorAnnulus … references unknown strings.
WA002ErrorAnnulus … pressure … is ABOVE MAASP ….
WA003WarningAnnulus … pressure … is above MAWOP ….
WA004InfoAnnulus … has no pressure readings.
WA005InfoAnnulus … has no MAASP defined.
WA006WarningAnnulus …: MAWOP … exceeds MAASP ….
WA007WarningAnnulus …: MAASP … exceeds the screening estimate … (…: …) — review.

WR - Configuration resource files (lexicons, vocabularies, labels)

CodeSeverityMessage (… = filled in)
WR001Errora unit has no id (name '…').
WR002Warningunit '…' has no name.
WR003Errorunit id '…' is used … times.
WR004Warning'…' is claimed by units '…' and '…'; it resolves to '…'.
WR005Warningunit '…': colour '…' is not #rrggbb.
WR010Warningunknown domain '…' (known: …).
WR011Errordomain '…': '…' maps to '…', which is not a valid canonical value.
WR012Warningdomain '…': code '…' is listed … times (codes are case-insensitive; the last one wins).
WR013Warningvocabulary has no 'domains' object.
WR020Warninglabel '…' is empty (the built-in text is replaced by nothing).

WP - Permanent plug and abandonment

CodeSeverityMessage (… = filled in)
WP001ErrorNo cement plug in the schematic - no permanent barrier.
WP002ErrorNo cement plug above the uppermost source of inflow at ….
WP003ErrorPlug '…' is … long; … required…….
WP004ErrorPlug '…': casing cement behind '…' does not cover … - … (cross-section not sealed).
WP005WarningOnly … plug(s) above the sources of inflow - a secondary barrier is expected.
WP006WarningNo environmental plug with its top shallower than ……….
WP007WarningCement plug '…' is … - verify it (tag and pressure test).
WP008WarningRule set '…' (…) has no value for …: the checks that need them are skipped - fill them in (abandonment.ruleSets).
WP009InfoRule set '…' measures the environmental plug from the ground / mudline, but the schematic's surface depth is unknown (datum GL / SB / ML): measured from the depth zero.